Corrado g60 turbo
| [Start] | [Questions ] | [ Injector] | [Ignition] | [Trigger] | [Display] | [Wbo2] | [Config] | [Table] | [Wiring] | [Idle] | [Tools] |
VW Passat
| [Start] | [Elektronic throttel] |
Audi S2
| [Start] | [Questions ] | [ Injector] | [Ignition] | [Trigger] | [Display] | [Wbo2] | [Config] | [Table] | [Wiring] | [Idle] | [Tools] |
24-09-2007
LCD question. I get some kind of rubbish on the display when the engine is started (see image) and when only ignition on there is no problems.
I use rs 232 cable fore connection and ca. 1,5 meters I length.
The plan worse to mount the display near the rear mirror at the roof so is there anything I can due to get rid of the noise?
Bad
Good
