VW Corrado
| [Start] | [Questions ] | [ Injector] | [Ignition] | [Triger] | [Display] | [Wbo2] | [Config] | [Table] | [Wiring] | [Idle] |
VW Passat
| [Start] | [Elektronic throttel] |
5/10-06
Thanx. Some more info, electronic throttle body.
As I see it there is a potentiometer mounted on the accel pedal that gives signal to the ECU and there is a reference potentiometer mounted on the throttle body, more to come.
So what we need is a variable output 0-12V(have to measure) linear to the accel pedal potentiometer
And maybe use an analog input channel to VEMS as the reference potentiometer feedbag.
Could this be possible to make ?
Thanx Peter
- See all the schematic/diagram vw passat at: http://www.vems.hu/files/MembersPage/PeterJensen/el%20diagram%20alt%202000.pdf
4/10-06
- I got a new car VW Passat 1999 and would like to VEMS it but can we control the electronic throttle ?
- most likely not. Any useful info about the throttle ?
- will it be possible in the near future ?
- if you get (find/sniff/query from manufacturer) the CAN-codes (assuming it's CAN-controlled), than maybe. Otherwise not
- Or are there another way to do it ?
- mechanical linkage (clumsy ;-)
