MembersPage/JoseLCortes (2005-10-17 12:42:36)

I have used motec on GSXR1000 last year in a team which I had worked in. Motec M-800 is great but it is expensive. Genboard seem to have same or superior hardware specifications.

newmironly.jpg

NEW, Motuner ecu tuning software

MembersPage/JoseLCortes/Motuner

Genboard Racing Functions

MembersPage/JoseLCortes/GenboardRacingFunctions

GSXR1000RK3 Engine Sensors Description

MembersPage/JoseLCortes/EngineSensorsDescription

Ignition timing accuracy test with Genboard_v3/Firmware2004-11-24_v11_2

MembersPage/JoseLCortes/IgnTimingAccuracy

My engine started with Genboard working in fully sequencial ignition (with COP´s)!!!

MembersPage/JoseLCortes/FullySequencial

Motorcycle Engine eddy current dynamometer

MembersPage/JoseLCortes/EngineDynamometer


The R1 engine is here!

122_2281p.jpg122_2289p.jpg
122_2281.jpg122_2289.jpg

Our mision is to install a Motec, but I hope to get install and test genboard in this engine, it is completely new engine, from a absolutely 0 km motobike!!!


First cycle strange firing sequence report 17-October-2005


The first turn during crancking seems to apears strange firing sequence it makes a ugly explosions during start process and dificult the starting process.

I have checked that it is not a ground loop or any electromagnetic noise. (in fact, now i am testing it with a simulator)

I have no multichannel oscilloscope so I built a "channel multiplier" with resistors:

-Ign Channel 00 - 9.4k lower pulse

-Ign Channel 01 - 4.7k

-Ign Channel 02 - 2.2k

-Ign Channel 03 - 1k higher pulse

strange17-10-05.gif

It is diferent than old testings, this time the sequence is always exacly the same. Only two ignition firings are erroneous.


Jose L Cortes

joseluis_jlc at hotmail dot com