MembersPage/TorokHimer (2008-04-02 06:41:26)

Projects:

MembersPage/TorokHimer/ETwentyOne

Old Project:

Target Car:

Bmw 325 (currently Motronic 1.3)

2.5L 6cyl I6 engine

Aims


Problem - solved by uploading a good config

  • the spark angle changes just now, getting a 64 degree offset (so display range changes to -64..+64 degree) this is a one-liner in vemsv3.ini but indeed an incompatibility between most recent and older MegaTune / firmware (direction: new MegaTune shows -55 degrees with an old firmware, when the real ignadv is 9 degrees)

See IssueReports on what information is needed to be able to help.

We filled the Spark table but th Spark angle indicator show -1,75 degree instead of ... degrees at RPM= and MAP= ...

WE SOLVED the problem with upload a good config and table.


Air and Coolant Temp Characteristics

Now the following question.

How I can make a Air tempereture characteristic.


Can I do the same in Vems output, I mean Is it possible to swith 3 injetors with one output (igbt)?

Succesfully day for the national.

We crank our engine and its starts for first time.

It was great pleasure for us.

We are really happy!

And I have a Birthday today! :)


PROBLEMS:

1.

The Ego Correction does not work. It switching On and OFF 1 second periodically.

- The lean Limit: 15%

- Rich limit: 2%

- Step 1%

- Speed change: 50

we tried to change the parameters but it is doing the same.

What could be the problem?

2.

we have dual solenoid motor for Idle.

No Idle control at all.

IAC wiring

Can you measure

We solved the problems!

NEVER SET THE ACCELERATION ENRICHMENT TO ZERO BECAUSE THIS SWITCHED OFF THE EGO CORRECTION!!!!!!!!


Tömítés készítõ Mogyoródon:

Kovács Zoltán +36 20 9346659

nem olcsó de jó.