| [ Start] | [Questions ] | [ Injector] | [Ignition] | [Trigger] | [Display] | [Wbo] | [Config] | [Table] | [Wiring] | [Idle] |
I´m using oe wiring, with a custom made adaptor , between Vems and oe wiring.
There is a IAT sensor from the webstore connected external aóf the wiring, as subaru dont have that,and offcourse the wideband sensor
I have on the 3 P259 output that i use, mounted a diode to the flyback wire, hoping for protection, so the relays not is going to kill te chip.
some of the extra parts that´s connected are:
Aircon cut relay = EC36-PIN4 =P259ch0 with added diode
Wastegate control = EC36-PIN 9 =inj 4
Fancontrol = EC36-PIN16 =P259CH1 with added diode
Knocksensor = EC18-PIN 3
Fuelpump = EC36-Pin15 =P259CH5 with added diode
Tacho output = EC -PIN =NOT Connected yet
