| [ Start] | [Questions ] | [ Injector] | [Ignition] | [Trigger] | [Display] | [Wbo] | [Config] | [Table] | [Wiring] | [Idle] |
I´m using oe wiring, with a custom made adaptor , between Vems and oe wiring.
There is a IAT sensor from the webstore connected external aóf the wiring, as subaru dont have that,and offcourse the wideband sensor
some of the extra parts that´s connected are:
Aircon cut relay = EC36-PIN4 =P259ch0
Wastegate control = EC36-PIN 9 =inj 4
Fancontrol = EC36-PIN16 =P259CH1
Knocksensor = EC18-PIN 3
Tacho output = EC -PIN =NOT Connected yet
