MembersPage/EricN/BuildNotes (2006-03-16 04:43:08)

This is MembersPage/EricN collection of links that I have found helpfull and ones I have found and am not sure how to find again.


Setting up 36-1 trigger

Edge = rising

Type = multitooth

Filtering = Disabled

TDC after the trigger (vr sensor) deg =??

Number of teeth on the wheel = 35

36-1

Trigger tooth = 1

Number one tooth after the missing one

Next Trigger tooth = 18

Crank min period usec = 3000 (assuming a 4cyl that is 6000usec for a whole crank rotation, which is 10000 RPM)

reset_engphase_after=decimal 216 (which is an arbitrary number for 720 crankdegrees, practical for 36 tooth wheel). The values below are in the same unit:

Angular width of tooth = 3 (10 degrees)

360/36=10

Angular width of missing tooth = 6 (20 degrees)


[rescue kit info]

GenBoard/VerThree/Schematic

[digital out assignments]

http://vems.sourceforge.net/manualhtml2/ch03s02.html this page]for pinouts and wiring diagrams

[tuning]