History of MembersPage/BmwVenesz/Ignition
Older Newer
2006-09-11 17:26:16 . . . . MembersPage/MarcellGal [connect EC36pin22 as well]
2006-09-06 15:24:20 . . . . MembersPage/MarcellGal [warn about using the WRONG type of output]
2006-09-06 13:41:13 . . . . MembersPage/MarcellGal [igntion]


Changes by last author:

Added:
See MembersPage/BmwVenesz

VW wasted spark transformer ? Szama ? Erosaramu bemenetei vannak, Logikai szintu ?

Ignition outputs (gyujtás kimenetek)

* cyl1,4 EC36pin35 (channel0) if you need logiclevel (original EC36pin34 (ch2) was bad!)

* cyl2,3 EC36pin36 (ch3) logiclevel, good.

We still need to find out the current requirement of VW transformer.

EC36pin34 CONNECTION was BAD. If this is 4 IGBT device (99%)

4+4: 4 IGBT + 4 logic-level output: namely channel0=EC36pin35, channel3=EC36pin36, channel5=EC36pin12 and channel7=EC36pin10 are logic-level

so channel2 is poweroutput, and channel3 is logiclevel.

Merd meg a DC szintet (bekapcsolt tapnal, allo motornal) +12V-hoz kepest; ird ide az eredmenyt. (ha 0V, akkor erosaramu a kimenet csak epp inaktiv; ha -12V, akkor logikai szintu, es eppen 0V-ot ad ki!)

GenBoard/Manual/DigitalOut/Table

ignchmax=03

ignition sequence: .. .. .. ..

EC36pin22 is also GND5, connect it (same way as EC36pin5,EC36pin21,EC36pin32). Kosd be az EC36pin22-t GND5-tnek.