Subpage for VemsExecutives
Because of time pressure ( WBO2 , display, ArmEfi design ):
- Marcell Gal is casedesign executive
- Fero (Ferenc Kulin) is vice executive
Plan
- DONE: negotiate with a new CNC partner with nice CNC lathe and CNC milling capabilities
- DONE: 120x40x 2.5mm Al profile selected
- the 9343 display becomes 114x34 (we can leave the name as is, IMHO).
- This donors space for VemsFrontier/ArmEfi : dimension = 114 x any; 114x111 proposed for compatibility with the finned profile (though that will ever be used with very low probability)
- non-central positioning of EC36 would be a good idea, for better space usage for MAP and custom)
ASAP: 2005-05-21 .. 2005-05-28
- Find an appr. 40x120mm extrusion that has some non-straight (but barrell-like 40mm side). With powder-type painting or sanding, and nice sticker it will be nice anyway. But why not make it as beautiful and original as possible.
- check O-rings that can be used
- choose plexiglass colors
2005-05-28
meet with partner about
- round display case: seems smooth, from an Al piece and a plexi
- endplate for chosen extrusion (Al and Plexiglass)
- frontplate for chosen extrusion
- make models and discuss
Candidates - for future
- Kulin Ferenc (MembersPage/Fero) (40 hrs/month)
- Rob Humphris (? hrs/month)
- Jörgen Karlsson. Good knowledge about the tools and procedures, good sense for the mechanical function of the finished product and cost for the solution. Fair sense of the estetics. But I'm not close to our current manufacturing facility and do not use the same primitive tools (like using Corel draw to make the parts.) as the manufacturing facility we are currently using. (40hrs/month)
nocandidates