MembersPage/MustangStef (2007-10-05 09:28:07)

Want to install on Honda S2000

Trigger setup is as follows :

1 crank VR with 12 even spaced teeth

MembersPage/PhatBob - I understood that the crank trigger was 12+1 (12 even spaced teeth with one extra tooth in between on tooth pair)

MembersPage/MustangStef - I double checked and it is 12 even spaced teeth, camshafts as below. Any ideas how to process this?

1 VR on inlet camshaft with 4-1 teeth

1 VR on exhaust camshaft with 4-1 teeth

Is it possible to use the crank sensor together with one of the cam sensors?

If so, how should i configure trigger settings?

MembersPage/PhatBob We have 12+N triggers working, the 4-1 teeth on the cams is going to need something clever to deal with, It might be possible to get something working with the short gap trigger code described here:

http://www.vems.hu/wiki/index.php?page=InputTrigger%2FShortGapTrigger