MembersPage/GeorgePapas (2005-07-16 17:34:55)

The car

The project car is a BMW E30 325iS with a M20 3.0 litre stroker engine and T04E turbo. The stock Motronic 1.3 system is not good enough for this engine, and it has been decided to install a Genboard.

Many details will be the same as for the installation of MembersPage/GergelyLezsak.


Engine details

Some of these things are still not decided upon:

Issues


Genboard wishes and details

The assembled unit should be configured like:

Econoseal harness or just connector

Flying loom for LCD

Is the connector on the loom of type DSUB9 (female) or DB9 (male)? There is often confusion as to which is male and female.

And which pinout is used? The newly proposed one or the old, both found on page GenBoard/BuildProcedures/LCDconnect. The newly proposed one is preferred.

The display that will be used does not need negative voltage for contrast .

EGT conn

Preferred date of shipping: late July. Note that order is apparently not checked out yet, it's among the "problematic orders". Please see if you can do something about it (check out). If you fail, for some reason, we can service it from there too.