TOYOTA SUPRA V6 biturbo
- 6 cyl , 2.5 L
- 2 turbocharger
- low impedance injectors
- VR primary trigger
This is my newest project. The car has a 12 toothed wheel stock. My idea is that to remove 1 tooth, so we'll have a 12-1 toothwheel. You can see here the picture of the wheel at TDC position. I want to remove the tooth that is in a black circrle. What do you think, will it work good? We have only this one wheel, thats why i ask this question, for sure.
There is some risk of an abnormally high amplitude VR signal at the missing tooth. Scope (or soundcard) recording of this trigger is definitely a good idea.
If you have a camsync 1 pulse available (even an M8 screw, used with GT101 HALL sensor, see sensors in WebShop), there might be a better solution.
MembersPage/PhatBob what model of Supra is this from? All the Toyotas I've seen have a 12 tooth per crank revolution and one or two cam sync's. I have a fair bit of toyota info so if you could give me the engine number I'll see what I can find