IssueReports/VemsTune (2013-08-25 08:42:47)

Add issues/bugs to most recent release at the top

Do not forget to mention at least:

Known issues


Vemstune 1.5.9

AnalogInputCalibrationWizard doesn´t work properly.

Min 1 , 100

Max 4 , 400

Gives

Scale 249 * 2

Input is 3v , results should be 300, comes out as 1494

Min 1 , 100

Max 5 , 500

Gives

Scale 250 * 2 .

Input is 2.5v, should come out as 250, comes out as 1250

(MaxValue - MinValue / MaxV-MinV ) = Scale

Offset = MinValue - (Scale * MinV)

Value = Volt * Scale + Offset

Unless I´m missing what A and B do?

Any reason why the values aren´t just 16bit, rather then having an offset and scale multipliers?

Adding new descriptors a problem when added to Misc, but Misc isn´t a selectable list, now impossible to create a new or edit said descriptor.

VemsTune 2013-03-26 1.5.3.

Vemstune page_config ini

Small vemstune bug, when limits are set on variable range, like:

; todo - strangely vemstune does not limit input to selected range, 0-3.1, is this a bug ??

fuelcut_delay_time = scalar, U08, 29, "s",0.1,0.0, 0.0, 3.1, 1

; eof todo - db

Vemstune does not limit input on set range (in this case 3.1) but rather on max variable size times multiplier (25.5)


VemsTune 2013-06-30

Offline editing config : Can't edit the curves with arrow keys or dragging with the mouse, only number input from keyboard works. Example: "warmup enrichment curve"

Tested with VemsTune 2013-03-26 and config file from firmware 1.2.11.

SD card does not record the switched config (say config A) when started to record under config B

Tested with VemsTune 2013-06-30 and config file from firmware 1.2.14.


VemsTune 2013-02-15

Primary Trigger Visual doesn't understand 8+ cylinder engines (eg. 16 resets the cylinder numbers, bad).

Fixed. (Get newest VT). Works upto 16 cyl.


2013-03-26 Digital displays on left side of Multi graph - report started from MembersPage/KevinBlack 's sentences

Every time I install a newer VemsTune (I use 2012-06-29 because it "works") - the first thing I notice is that the digital displays on the left side of the multi graph view do not change then the cursor is moved left to right (stuck at 0.0 sec values ?).

  • not sure if screen resolution or OS details are important (but unknown) for this.
  • please confirm that it's a problem when upgrading from 2013-03-26 to 2013-08-29 version or if the problem is gone (any issue is only fixed in new VT)

Vemstune 1.3.1 2012-07-30

Problem with Editor after saving a certain view.

It will add more instances of the same channel, this has been

a problem on many older versions as well, I don´t think any version has ever not had this problem.

editorproblem.jpg

Also just to note :

As discussed with Emil it would be nice if the whole view could be saved as a single file for export to customers, this means gauge views and multi graphs all saved into a single file.


Vemstune 2012-01-30

Using firmware 1.1.98 Y axis values are wrong after upgrading to this firmware.

Also bug after uploading firmware is that the ecu is stuck in

safety mode after firmware update. Tested back in 2011-12-21 and no problem there.


Vemstune 2011-15-11


FIXED: VT 2011-06-04 flags fake warning

For the Audi trigger divide by 3 setup (default VemsTune/QuickStartAudi ) show a warning on validate.


In vemstune/config/include page-config-[version].ini

change sdcard_choice sdcard_choice = bits, U08, 149, [1] , "INVALID", "INVALID", "INVALID"

In to

sdcard_choice = bits, U08, 149, [2], "Disabled", "Enabled"

I don't know if its good but it works getting your knock working again in channel 0.


VemsTune 2011-05-27

(report by Mattias)

VemsTune 2011-01-20


Fixed items

May not appear until next release.