Changes by last author:
Changed:
| Testing on the bench with: Recorded trigger as a wav works okay, testing distributor driven by a motor works fine. Testing with the trigger in the car through the loom does not give an RPM reading. |
|
* Testing on the bench with: Recorded trigger as a wav works okay, testing distributor driven by a motor works fine.
* Testing with the trigger in the car through the loom does not give an RPM reading. ** so the amplitude is too small, or the pullup too strong ** DC voltage measurement ? ** AC voltage measurement ? ** RPM ? Cranking ? or somehow running engine (with alien ECU) ? |
| Will this work with a divider of 2 to ensure that we get a batch injection event every second ignition event? |
| Divider=02 means injection event every second ignition event. Good if you have 2 injectors hardwired in parallel. (or, even than, you can (at the cost of a few wasted cycles) do something like: h[0]=00 02 00 01 .. .. .. .. |