Subpage of VemsTune
Since VemsTune 2011-04-22 Audi Quick start has been simplified.
It can be reach from: Tools/Firmware/Audi config upload (instead of File/project)
- Open a project file with Tools/Firmware/Audi config upload/open (open in VTHOME/defaultfirmwareconfig/audi) by default there are 2 project files.
- After opening the project file following dialog will be appeared (same as in the old version):
- Select the apropriate cfg files and upload the config set to the ECU.
- Example to upload project files that have been prepared (usually by the install supervisor or power-users) for certain (family of) setups. "Family" means: usually the trigger, IAC and other parameters are the same. There might be choosable options, like for injector size, cam-HALL example yes/no, or for ignition output setup (AAN/3B).
- After this step the process is same as in case of normal cfg upload (File/open cfg file).