Developer page about a possible Motronic plug and play layout
I went to a Porsche workshop today, and seen lotsof interesting things. I thought that factory corvettes are the most outdated engines on the power market, but the air-cooled 6 cylinder 2L Porsche engine wins - especially the carbed ones :-)
Anyway, there would be demand for an advanced ECM that can be plugged to the place of a 55-pin (19 + 18 + 18) [JPT-connector ]Motronic box, many cars (Porsche, Opel, GM) shipped at least from 1985..1996.
The problem is there are too many [motronic types]. Even with the 55 pin connector. It only makes sense to make hi-tech substitute for
- ECM used in many vehicles
- vehicles that are often tuned or played with
- not too advanced from the factory. It's unlikely that one would swap a new 96-pin motronic.
The 1.1 .. 1.3 Motronics on BMW seem to fall in this category.
TODO:
- collect links
- variaties
- geometry
- pinout(s)
- special issues (MAP, MAF signal, trigger?)
- extra connection for advanced features (like WBO2)
I MembersPage/JohanErikssonluleasweden runs my opel calibra with genboard v3.2 in motronic m2.8(55pin) box. I have placed 3 extra connectors on the top of the box for egt, wb02, boostcontrol.
....
Suggestion:
Make a daughterboard to mesh with the GenBoard inside the case so that the pinouts can be easily changed either with a jumper board or a custom wiring board, makes it so you can plug it right into a system. Only the little ConnectorBoard would require new layout (easy) for the right connector and the endplate would need done for each type of connector JPT-55p etc..
Digifant I is a definate that could be replaced. It is a common swap into turbo 8v's (VW's) as it has a standard vw wiring loom and is programmable these typically run ~200-300 used. Not including the custom chip, but comes w/ a wiring harness.
CIS-* cars: (all have restictive Fuel-air plate)
- CIS cars have only JPT7 for the ignition module no other connectors.
- CIS-Lambda cars have a O2 jetronic (K-Jet) 25 pin JPT connector
- CIS-Lambda with knock ( a common conversion for CIS-Lambda cars)
- CIS-Motronic.. Now there is a beast I know nothing about. fill me in.
Biggest market for VW's is problably the current A3 2.0 xflow motors, these motors are readily available, easily turbo'ed, and very good for being modified. Has a VR crank trigger, some have Hall cam triggers (4 window), it is already some type of motronic. and coilpack activated.
Higher profitablilty would be the 1.8T 20v motor. has all the right fittings, and sensors.
See also