MembersPage/RobertOffner (2006-05-28 21:39:58)

Alien Logging

After the FirstProblem is solved I want to log my Ignition to get an Idea how much Advance vs. boost i have. Do i need to populate the second LM1815 Chip? I want to log the Ignition in the car, because my Ignition have two triggers (first one every 180deg on TDC Cyl. 1+4 and on TDC Cyl. 2+3, second one 122teeth per revolution at the Starter gear). Is it right that i need a cable from the Coil Pin 1 to the input of the second trigger?

In my_make:

LOG_ALIEN ?

SEND_DWELL_NOT_IAC ?

CAPTURE_ALIEN_ECU O.K.

MS_COMPATIBILITY NOT defined O.K.

MSNS NOT defined O.K.

See my notes on OnlineCourse/AlienIgnitionLogging

In global.h i found for trigger2:

bit0 0:falling/1:rising,

bit1 0:enable/1:disable,

bit2 0:no filtering/1:filtering,

bit3 0:toothwheel/1:coil,

bit4 0:alien advance/1:cam sync,

bit5 0:single edge/1:both edges when cranking

so i think config.secondary_trigger=13 ?

Sensor Calibration

The most frustrating work for a newbie is Sensor calibrating.

I changed the gentherm2 utility for my needs. You put the three temp-resistance Pairs in and get a hex file out with which you can patch vems.hex. I put my Sensor calibration Data and this program into [Sensor Url].

I found a little Problem with hexpatch and my VDO cltfactor file:

  1. snip#
NOTE: hexfile line neglected: #

NOTE: hexfile line neglected:

ERROR: not a hexa digit: a

ERROR: not a hexa digit: b

ERROR: not a hexa digit: c

ERROR: not a hexa digit: d

ERROR: not a hexa digit: e

ERROR: not a hexa digit: f

NOTE: hexfile line neglected: :020000020000FC

replaced (idx=1f) to: :1003f0002D2A282624211E1B1814100C060000008C

replaced (idx=20) to: :10030000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFD

replaced (idx=21) to: :10031000FFFFFFFFFFFFFFFFFFFFFFFFFFFFFEFCF1

replaced (idx=22) to: :10032000F9F7F5F3F1EFEDEBEAE8E6E4E3E1E0DE1F

replaced (idx=23) to: :10033000DDDBDAD8D7D6D4D3D2D0CFCECDCCCAC994

replaced (idx=24) to: :10034000C8C7C6C5C4C3C2C1C0BFBEBDBCBBBAB9A5

replaced (idx=25) to: :10035000B8B7B6B5B4B3B2B2B1B0AFAEADACACAB8A

replaced (idx=26) to: :10036000AAA9A8A8A7A6A5A4A4A3A2A1A1A09F9E4C

replaced (idx=27) to: :100370009D9D9C9B9B9A99989897969595949393FD

replaced (idx=28) to: :10038000929190908F8E8E8D8C8C8B8A89898887A4

replaced (idx=29) to: :1003900087868585848383828180807F7E7E7D7C45

stats: 11 lines replaced (6053 remained)

  1. snip#

Maybe somebody knows why this is?

If I patch the vems.hex with hexedit - no problem.

Hope it helps.