This car is a 4wd Mazda 323. It is stripped with a cage, 2 seats, steering wheel, shifter, pedals and not much else.
This year the powerplant was upgraded from a stock B6T to a BPC8 (323GT-R engine). The engine has an equal length manifold with a Garrett GT2861RS turbo.
MembersPage/MichaelRichards/Projects/TonyGTX/Wiring has details on how the wiring is done.
---
I'm trying to get the 1.1.12 firmware running on this car... Here are the mazda trigger settings so far (don't work yet)
- trigger settings
secondary_trigger=18
tooth_wheel=04
trigger_tooth=FF
another_trigger_tooth=FF
crank_minper=46
tooth_wheel_twidth1=D0
tooth_wheel_twidth2=02
cam_sync_r_edge_phase=FF
cam_sync_f_edge_phase=FF
reset_engphase_after=04
- end trigger settings