Danish VW beach buggy Vems v3.1 project. 4 cyl boxer engine, port inj, wasted spark.
Im still soldering but having a hard time finding the right dokumentation for v3.1
- See GenBoard/VerThree/Schematic
- it's almost same as v3.6 or v3.7 except minor layout changes and v3.1 lacks cam-HALL inverter
23-05-2013
before pictures.
Topside www.dropbox.com/s/wohkjdyu889yo66/2013-05-21%2001.28.01.jpg
Bottom www.dropbox.com/s/73q3ywo2wmqegbz/2013-05-21%2001.27.01.jpg
.............................
So far i have mounted.
Flyback diodes M 724 B14 ZP -> lowZ ?
Transient protection diode 1.5KE18A
L3 1R5 in fuse 1 holes ?
Resistor briged 5X-1-103
................................
Not mounted jet.
im missing inj FETs and gate resistors size ohms ?
* i think i need 22 or 33 ohm resistors ?
* https://shop.vems.hu/catalog/injector-only-p-59.html
Ign FETs i have N408AB 14N40FVL ?
Mapsensor
connectors
Anything else missing ?
Topside www.dropbox.com/s/5lrytxlz9129kc4/2013-05-23%2000.39.58.jpg
Bottom www.dropbox.com/s/97iwhmmsr837lg8/2013-05-23%2000.40.18.jpg