MembersPage/Kryniu (2013-11-28 11:44:45)

MembersPage/Kryniu/ToyotaSupra2jzgte

Trigger

crankshaft 12 teeth vr without missing teeth

camshaft 1 teeth vr two sensors

my question is

do I must grind 1 teeth from cranck wheel?

Maybe engine can run in camsync with 12 teeth coil whell and 1 pin camshaft.

A: No tooth grinding required, the 12+1 trigger pattern is supported by VEMS.

do you have some initial config or configuration primary and secondary triggers for this engine??


MY INITIAL CONFIG

problem is when im crancking VEMS sees the engine speed after 2 seconds in log you see when im starting crancking the battery level going down and after 2 second vems see rpm

trigger log

http://www.vems.hu/files/MembersPage/kryniu/v3.3_u008415-2013-11-28-11.04.16%20long%20cranking%20for%20rpm%20see.triggerlog

vems log

http://www.vems.hu/files/MembersPage/kryniu/v3.3_u008415-2013.11.28-11.07.40%20long%20cranking%20for%20rpm%20see.vemslog

This issue (long cranking with simpletrigger + camsync has since been fixed) for more details see: GenBoard/UnderDevelopment/FirmwareChanges. Upgrade firmware to 1.2.16 to make use of this fix - DB