Just a place to jot down varius issues i ran into, hope they help the next person!
Some injectors not firing:
- First array element in h[2] not firing
- h[2] ??? h[2] is related to ignition sequence, not injectors.
- manually triggering the array output using mdh command. All other array elements worked regardless of output.
this is discussed briefly on the bottom of this page GenBoard/Manual/DigitalOut
From what i found, alot of the misc outputs were set to injgroups that fire injector channels through h[0] entries. I opened up the Megatune and opened the tab for all outputs table. Most of them i wasn't using, and i just set them to disabled.
This cleared up the issue - but boy was it a pain to figure out.