MembersPage/HankMoody/AIM (2013-01-28 18:15:48)

I use a datalogger and dash from the company Race Technology.

The dash and logger was purchased with the race technology Vems interface!


Im running v3 firmware 1.1.96

Some of the channels within the AIM datasream are correct.

order Race Tech with "Motec interface" (wether used for Motec or VEMS) not with what they call "VEMS interface" (because latter is sold by Race-Tech untested, and it does not work, and not needed anyway)

Thanks for the well documented answers.

Race Tech offers a few different kinds of interfaces for the MO-Tec ECUs. One CAN interface and 3 different serial interfaces.

info can be found here:

http://www.race-technology.com/wiki/index.php/ECUType/MotecM4AndM48

Which one will work for Vems?