MembersPage/DevinPersons (2012-07-17 06:23:40)

Vehicle Overview:

1989 BMW e30 with a M50b25 NV out of a 91 BMW 525

specs on VEMS:

1 x Assembled v3.6 controller

- 1-wire interface: no

- withSDcard: removable

- PS2 connection: no

- secondary_trigger: HALL Need to convert to VR!

- mounting-style: no-screws

- MAP connection: 400kPa (5/3mm pneumatic)

- LCD connection: no

- EGT input: 1

- Flyback: 30V flyback

- ignition driver: 8

- Knock input channels: 2

- primary_trigger: EC36/27 VR

VEMS was purchased for a later M50 with Hall. This engine has a VR/VR trigger setup. to extend coil life and prevent IGBT's from over heating a cam sync will need to be installed. After following directions on this page: http://www.vems.hu/wiki/index.php?page=GenBoard%2FManual%2FInputTriggerHardWare

this is where the project sits.