Honda F20
From the S2000, this is now a popular engine conversion into older cars and Lotus 7 replicas as it is an RWD engine.
There are 12 equally spaced teeth 30 degrees apart, with an additional tooth positioned ~20degrees after one (~10degrees before the next).
Using: InputTrigger/ShortGapTrigger
Which gap do we trigger on - the 20degree or 10degree gap?
did you try with missing tooth setup
- if gaps are 30,20,10,30 (in this order)
- try a simple missing tooth setup
- since 10=>30 is more than 1.5 x even multitooth advanced filtering is not needed
- another_trigger_tooth=06 (if 4 cyl)
If gaps are 30,10,20,30 than a variation of InputTrigger/ShortGapTrigger that is not yet supported, I think (because it would also require shortgap at the next event to be fired, 180 degrees later in a 4cyl)