[[Manual: Basics.Install.Mechanic]]
Soldering steps after the mintest:
- big black barrell inductivity
- knock chip
- quartz 16Mhz and 4 Mhz
- main fuse wire
- stepper chip
- stepper capacitor (C75)
- stepper Vbatt wire in the place of D45
- two trigger zeners (D14, D27)
- trigger1 pullup resistor REMOVE (R55)
- flyback diodes
- wire out the knock the RS232 and the MAP signals into the EC18
- FETs,IGBT, EC connectors
Back to GenBoard/Manual