*1 Genboard PCB

*8 FET's - 6 injectors, 1 WBO2, +extra

*4 IGBT's - 3 ignition banks, +extra

*1 MAP sensor

*1 Bag of bits labeled RESC1 (don't know what those are for yet)

*1 Bag of bits labeled RESC2 (don't know what those are for either) GenBoard/VerThree/RescueKit

I'm planning on removing the stock ECU entirely if possible and making a custom connector running between the stock harness connector and the genboard connectors, to keep a clean look.

I've traced all of the wires i'll need to the stock ECU.

T68 is the ECU plug, GB36 & GB18 are the Genboard connectors

I'll fill in this list as I figure them out. If anyone wants to help complete the list, feel free.

*Air Temp - T68-36 BL/G to GB36-2

*Coolant Temp - T68-14 BL to GB36-14

*TPS Signal - T68-40 G/W to GB36-1

*TPS 5v Ref - T68-41 BK/GY to GB36-28

*IACV (fast idle) - T68-27 R/BL or 53 BK/W to GB36-3

*Speed Sensor - T68-44 W/R and T68-68 G to GB? (VSS - Vehicle speed sensor? Not needed.)

*Hall Sensor - T68-44 W/R to GB36-27

*Injectors

**C1 T68-24 GY to GB36-7 INJA(Really any of INJ[A..H])

**C2 T68-24 GY to GB36-19 INJB

**C3 T68-24 GY to GB36-8 INJC

**C4 T68-24 GY to GB36-20 INJD

**C5 T68-24 GY to GB36-9 INJE

**C6 T68-24 GY to GB36-18 INJF

*Coil

**Bank1 - T68-8 BK/BR to GB36-35 DRIVE_00

**Bank2 - T68-67 R to GB36-33 DRIVE_01

**Bank3 - T68-68 G to GB36-34 DRIVE_06