VEMS Home Products Documentation Wiki Webstore
WikiHome ProjectPage DocsPage UnderDevelopment MembersPage SiteIndex RecentChanges Preferences
History of GenBoard/UnderDevelopment/DigitalInputs
Older Newer
2006-09-10 12:44:18 . . . . MembersPage/MarcellGal [note on mcp3208 inputs]
2006-09-08 13:52:53 . . . . HansK [Q. about indput channels]
2006-07-01 00:51:08 . . . . MembersPage/MarcellGal [thanx, Robert]
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [analoginputs link]
2006-03-16 04:43:08 . . . . modemcable176.254-81-70.mc.videotron.ca
2006-03-16 04:43:08 . . . . MembersPage/MarcellGal [linked resistor network for N x on/off => analog input]
2004-08-24 05:49:57 . . . . MembersPage/MarcellGal [added MCP3208 8 inputs, and minor cleanup]

Changes by last author:

Changed:
Someone can write here any other possible pins?
Any other possible pins?
Changed:
Which pins is the input channels 0-7, that you can choose in the new MT (1.0.53) fore ALS, Launch Controle and shift-cut settings?
* Which pins is the input channels 0-7, that you can choose in the new MT (1.0.53) fore ALS, Launch Controle and shift-cut settings?

** Check [product] in webshop for the EC18 availability of mcp3208 channels depending on product options (internal MAP, auditrigger and 1-wire)

** If you assembled yourself, check the assembly notes.

** take care with these unprotected inputs, anything outside the 0..5V range will kill the MCP3208 chip. Besides the pullup resistor (eg 10k to +5V) you might want to apply a 5.1V zener (or 2 protecting diodes, 1 to GND and other to +5V). Anyway, keep 12V far away !