MembersPage/TomPhillips (2006-11-19 16:22:06)

Here is a short description of the project Im working on.
All comments welcome before I put in the order.
Thanks


Target features:

--

Assembled v3.3 controller

--

VEMS parts to be ordered with control

--
ECU Pin Assignments
Function Econoseal Pin
Sensor power 5V EC36-28
Sensor ground EC36-26
Power ground EC36-5 batt-gnd
Power ground EC36-21 batt-gnd
Power ground EC36-22 batt-gnd
Power ground EC36-32 batt-gnd
Flyback EC36-23 (Injector return)
injector 1 EC36-7 (Injector A)
injector 2 EC36-19 (Injector B)
injector 3 EC36-8 (Injector C)
injector 4 EC36-20 (Injector D)
injector 5 EC36-9 (Injector E)
injector 6 EC36-18 (Injector F)
CLT EC36-14 (CLT Coolant Temp)
IAT EC36-2 (Intake Air Temp)
TPS EC36-1 (TPS signal)
TPS 5v EC36-29 (TPS +5v)
IAC PWM EC *******
Crank sensor (vr) EC36-27
Cam sensor (vr) EC18-13
coil1 EC36-35 (Coil #1)
coil2 EC36-33 (Coil #2)
coil3 EC36-34 (Coil #3)
coil4 EC36-36 (Coil #4)
coil5 EC36-11 (Coil #5)
coil6 EC36-12 (Coil #6)
Fuel Pump Relay EC36-15
Fan Relay EC36-16
Control Relays (2) EC36-30 (Injector/Coil Pwr)
knock signal A EC18-2
knock signal B EC18-3
MAP (offboard) EC18-6
nernst_cell EC18-13
heater - EC18-18
pump - EC18-7
pump + EC18-9