MembersPage/TeppoKalske (2007-02-04 21:01:09)

Teppo Kalske from Finland, born 1972

I'm currently using VEMS on my daily driver Audi RS2 with 16x14 maps.

Just tested 1.1.9 firmware with auditrigger:

- Gets cam sync much faster when cranking than older version, very nice!

- When revving engine without load (neutral) gives trigger error around 6500 rpm

- When revving engine with load (2nd gear) gives trigger error around 4000 rpm

- after trigger error ignition stays off until revs are below 2000.

- base timing seems to be quite a bit different than with earlier firmware

---

Please upload the config and tables from your unit completely here. Also some logs if you have.

Thanks / Emil