Controller serial nr: 6712
Trigger:
I am using the Hall sensor from the VEMS Shop with an Elbe Engineering 36-1 wheel. Missing tooth is 90* from sensor at cyl 1 TDC.
https://shop.vems.hu/catalog/hall-sensor-p-107.html
Engine:
Mercedes Cosworth 2.3-16
Displacement: 2299cc
Bore x Stroke: 95.5mm x 80.25mm
Combustion Chamber: 52.5cc
CR: 9.7 to 1
Firing Order: 1-3-4-2
Ignition:
Bosch 2x2 from Vems Shop
https://shop.vems.hu/catalog/bosch-motorsport-ignition-p-113.html
Injectors:
630cc Siemens injectors from the Vems Shop.
https://shop.vems.hu/catalog/siemens-630cc-60lb-injector-p-79.html
I'm using Injector Voltage Compensation Strategy "simplfied" with this chart I found:
https://malwarebytes.box.com/s/sp5v0b3r6mtfshexd2hdkyalyzr5gvxk
Other Outputs:
Tach
I am able to start, idle and drive the car around. Warm idle is ok but it hunts a lot. Cold idle doesn't really work. I let the live analyzer do most of the ve table. I would like to get the idle more stable. I am new at this and definitely need help.
My Vems config file: