MembersPage/SamuelLindkvist (2006-03-26 18:59:48)

BMW M3 1987


Alpha-N

Cams: 292/292 with 12mm lift.

No plenum. Just four 15cm intaketrumpets straight in the air, so no good place to put vakumhoses.


Config and Tables

Will upload my config.txt as soon as possible.


Triggerwheel

My car is now running fine since i made a new triggerwheel. =)

[This] is the new one. And [this] the old.


Fuel setup

4cyl, 2300cc

300cc injectors (2.4ohm) Bosch 0280150355, 1 in each port

cyl inj EC36pin # h[0] #
1 A 7 01
2 F 18 20
3 G 6 40
4 H 17 80

h[0]=20 80 40 01 00 00 00 00

h[1]=00 00 00 00 00 00 00 00


Ignition setup

Multi-tooth trigger wheel 36-1.

VR-sensor from FORD.

2 ign banks, firering a dual coil with 4 outputs (Wastefire)

cyl Driver EC36pin # h[2] # mdh
1+4 00 33 00 mdh82
2+3 01 35 01 mdh92

h[2]=00 01 00 01 00 01 00 01