VEMS Round with Motronic 7.1
VEMS Round using the following input:
- WBO2
- EGT
- Analog 1 --> 10 bar oil pressure sensor
- Analog 2 --> 400kPa VEMS Map sensor
Currently there is no way to display *BOTH* analog outputs on the display. I would like to see both boost and oil pressure on the slots.
Outputs:
- PWM0 -> reference RPM drive warning led for shiftlight
- PWM4 -> reference RPM drive "shift-now" led for shiftlight
Both PWMs should reference RPM and start sending PWM signal to the respective leds when reached the configured RPM.
Either needs a new target method for both PWM outputs or a hackish way is to configure an unreachable EGT or lambda target.
Sounds like a crap solution.
- Linear wideband output is connected to Motronic 7.1 for data-logging. (This Motronic ECU is dual-narrowband with dual EGTs for mixture preparation.)
- RPM input is coming from the Motronic RPM signal (instrument cluster), can this even be configured or do we need a crank signal?! If that's the case the documentation (Help) should be change to state something other than "RPM Signal".