PLEASE collect real vemslog and triggerlog here...
Here is a temporary (before dyno programming) config, log:
http://www.vems.hu/files/MembersPage/Suzuki36-2-2/real/v3.3_u022060-2022.02.15-11.21.21.vemslog
http://www.vems.hu/files/MembersPage/Suzuki36-2-2/real/v3.3_u022060-A-2022.02.15-11.00.10.vemscfg
http://www.vems.hu/files/MembersPage/Suzuki36-2-2/real/v3.3_u022060-2022-02-12-16.31.47.triggerlog
Make sure
- to try and report with vemscfg in which
- config matches the configlet on MembersPage/Suzuki36-2-2,
- except secignore=01 for the new campulse-train.
- secondary_trigger=58 falling edge is OK instead of 59 (rising edge)
Sectrig disabled
- This should be a last resort, with number of teeth on wheel=12 instead of 24, and the trigger tooth sequence is 0 6 0 6 .... instead of 0 18 12 6 0 18 12 6 (decimal, traversed backwards ).
The number of sectrig campulses inside the tooth-runs matches the generated signals (exact campulse length and position does not matter):
