Hello, I own 1991 Audi S2 coupe with 2,2L 5syl 3B engine, and my main goal is to make it run on VEMS and get power between 350-400BHP. Right now my best ET at 1/4 mile is 12,82.
Currently my setup is:
Intake: AEM 4" air filter, original K24 7000 turbo, big intercooler with opposite direction air flow, by-pass in new location and drilled intake manifold.
Exaust: RS2 manifold, wastegate wiht stronger spring (old 10VT audi one), stock downpipe, straight through pipe to last original silencer.
Fuel: stock fuel pump but modified elecrical system, mallory FPR.
Gauges: VEMS Round WBO2 and EGT (2mm EGT sensor, RPM input, analog input for boost, analog output for stock ECU NB lamda), boost.
Brakes: 4x zimmerman discs, ferodo brake pads, Motul RBF600 brake fluid. Front brakes are waiton for upgrade, alredy buyed wilwood 4 piston calipers and audi A8 320mm discs.
Suspension: 4x kony yellow shocks, original springs are wating for lowering ones.
Body: The car got new paint a year ago, for better cooling it has modified RS2 replica front bumper, a little wider rear bumper, loesed lower door covers, tinted windows.
Other: 034 short shifter
Future plans:
Need to change the 2mm EGT sensor with 6mm one. Bigger MAP sensor for boost logging. Change the ingniton system and eventually VEMS ecu (this takes for some time).