I am looking at a Webshop customer's v3.2 board. He was reporting problems that Jorgen guessed was a config issue.
I made a config which cured his issues, and downloaded it to his 3.2 Then as a test I uploaded the config, remade it and downloaded it again - the problems he reported came back.
Uploading the config again and comparing them showed the following problem
| Original Config | Uploaded Config |
| als_ignretard=FF | als_ignretard=FF |
| als_rich=FF | als_rich=FF |
| misc1out_minrpm=FF | als_rev_limit=FF |
| misc1out_maxrpm=FF | misc1out_minrpm=FF |
| misc1out_mintps=FF | misc1out_maxrpm=FF |
| misc1out_maxtps=FF | misc1out_mintps=FF |
| misc1out_minmap=FF | misc1out_maxtps=FF |
| misc1out_maxmap=FF | misc1out_minmap=FF |
| misc1out_channel=FF | misc1out_maxmap=FF |
| misc2out_minrpm=FF | misc1out_channel=FF |
| misc2out_maxrpm=FF | misc2out_minrpm=FF |
| misc2out_mintps=FF | misc2out_maxrpm=FF |
| misc2out_maxtps=FF | misc2out_mintps=FF |
| misc2out_minmap=FF | misc2out_maxtps=FF |
| misc2out_maxmap=FF | misc2out_minmap=FF |
| misc2out_channel=FF | misc2out_maxmap=FF |
| act_wot_rpm=FF | misc2out_channel=FF |
| act_wot_channel=FF | act_wot_rpm=FF |
| act_rpm_rpm=FF | act_wot_channel=FF |
| act_rpm_channel=FF | act_rpm_rpm=FF |
| egt1_cal=49 | act_rpm_channel=FF |
| egt1_offs=00 | egt1_cal=49 |
| boost_conf=00 | egt1_offs=00 |
| boost_targetoffs=00 | boost_conf=00 |
| boost_minpressure=FF | boost_targetoffs=00 |
| boost_pid_kp=20 | boost_minpressure=FF |
| boost_pid_ki=80 | boost_pid_kp=20 |
| boost_pid_kd=01 | bip_b |
| boost_pid_ilimit=FF | _yw00roFkfF=r |
| boost_channel=FF | |
| water_pump_temp=00 | |
| hybrid_rpm_a=00 | |
| hybrid_rpm_m=00 | |
| water_pump_hyst=00 | |
| water_pump_channel=FF |