MembersPage/Norbitron (2012-04-08 19:45:42)

Hello!

I assembled my new board into a motronic box with motronic55 connector.

I think this pinout is ok from Econoseal to Motronic55. I would like to if you check it.

http://www.vems.hu/files/Norbitron/econoseal-motronic.xls

IMG_1338.jpg

I tried to connect my ECU to the PC but it didnt want to communicate. The vemstune couldn't find the ECU. Can i use a special settings? Or did i take a mistake?

Where i will start the troubleshooting?

Thanks

Norbi