What trigger settings are reccomended for the following setup?
Merc 190 2300
4cyl
distributed
VR sensor on crank
2 long metal pieces on flywheel (Vemstune scope shows good healthy signals)
problem is that the signals are placed to TDC.changing falling<>rising doesnt seems to cure the problem.
we can run 0 deg ignition at max or 45deg BTDC min.
More details:
DC voltage = 207mV
Resistance of the sensor = 0,768 kOhm
thanks///pnanassy
Peter, compare trigger to 6 cyl M103 engine : MembersPage/MattiasSandgren/MercTrigger
//Mattias
Thanks Mattias!