Now i will have a little time for upgrade the car.
I want to use a stock Audi Bosch Idle air valve,2 pin,cigerette style.
How to wire it?
- Stock idle air valve is pwm style. Connect other pin to +12V, other to free injector channel.
- Choose PWM/Stepper from idle settings, choose PWM type and correct idle solenoid channel under Iac hardware setup
- In idle control PWM reference table, fill in values 60 down to 30 linearly decreasing, these need some tuning but something to start
- try to check other idle setting from [this msq]