I'm setting up a high-compression hayabusa. The triggerpattern during cranking is very irregular.
I have made logs :
http://www.vems.hu/files/MustangStef/triggerlog/BUSA.TXT
http://www.vems.hu/files/MustangStef/triggerlog/busaminus4wav.wav
The trigger setup is a 24-4 wheel.
The problem most of the time is at tooth 16 which is interpreted as missing tooth where in fact it is a normal tooth.
i'm using megatune v1.0.73.
How do i set this up correctly in megatune?
angular width of tooth = 5?
angular width of missing tooth = 25?
Should i setup the toothrel? if so , how?
Since the 16 tooth differs more than 1.5, it is interpreted false. Can i change the 1.5 to another value?
Kind regards,
Stefaan Raeymakers