Project VW Passat VR6
Demo/Test Vehicle for VEMS V3.3
VW VR6 6 cylinder engine
Firing order 1-5-3-6-2-4
Sequential fuel injection
60-2 VR crank trigger
1 Window hall cam trigger
NTC temp sensors
Standard TPS
2 OEM knock sensors
High-Z injectors
3X double ended waste spark coil with ignitor
2 wire PWM Bosch Idle Valve (min/closed duty ~25%)
- Bosch #0 280 140 512/ VW #034 133 455B
- 2 wire, 8.2 Ohms (~1.5A)
Current Order:
- 1-wire interface: NO
- Ignition driver: 4+4
- Knock and EGT: Yes (2 knock,1 EGT)
- LCD and PS2: Yes
- MAP connection: Onboard 400 kpa)
- PowerFlyback: 30v bidr
- Primary_trigger: VR (60-2 wheel)
- Secondary_trigger: HALL (one window)
- Lower (than 510 Ohm) resistors for i259 logiclevel outputs for use with VAG 1.8T COPs
- OEM Bosch temp sensors (pullup needed?)