Cossi Triggerpage
Primary tigger:
- 665 Ohm (with sensor disconnected)
- 148 mV (with sensor connected, ignition ON, not cranking)
Secondary trigger:
- 817 Ohm (with sensor disconnected)
- 0 mV (with sensor connected, ignition ON, not cranking)
The LCD and Megatune shows aroud the right rpm through cranking.
When I try to positioning ign_tdcdelay, I get only 3 possibylity erratic crank angle as I change the value:
- BTDC around 80 degree
- ATDC around 10 degree
- ATDC around 100 degree