MembersPage/Kamuto/Technical (2016-11-17 04:11:40)

http://www.vems.hu/wiki/index.php?page=MembersPage%2FKamuto

e92 drift car with vems and motec stuff + bmw s54 engine.

vems v3 on bmw s54 with vanos done that no questions.

motec c125 dash

http://www.motec.com.au/c125/c125overview/

Communications

2 x Configurable CAN buses with individually programmable CAN bus speeds

One can be used as RS232 Receive

RS232: 2 x RS232 ports

One with Transmit and Receive

One with Receive only

dash can be customised any way, both for can recieve and transmit, rs232 can be custom too as I understand

motec PDM30

Communications

1 x CAN

Has

Outputs: 30

Inputs: 16

inputs can be used as switches for activating outputs from vems or simple switch.

fuel pump, main relay.

pdm can bus can be fully customized both ways.

pdm_can_bus.png

pdm_can_bus1.png

1.

the goal is to feed can bus to these 2 devices, to control fans, water pump, oil cooler fan, fans with pwm based on coolant temp and so on :)

2.

feed Vems can bus data to C125 display, main parameters + oil pressure, fuel pressure, and oil temp is a must.

the ways to do it?? aim2can? other hw?

can id's

m800

rpm

wheelspeed

oil pressure

oil temperature

water temp

battery voltage

throttle angle

manifold pressure

air charge temp

ex gas temp

lambda

fuel temp

fuel pressure

gear