As my Genboard v3.3 seems to be installed, I will now try to dig through the configration.
I have studied MembersPage/BenNesbitt, who also has a V8 Audi, but he has coil-on-plug ignition, so not entirely applicable to my project.
Ignition.
- 1989 Audi PT 3,6 liter 32valve V8
- trigger: Primary-VR, Secondary-HALL
- firing order: 1-5-4-8-6-3-7-2
- ignition type: wasted spark
- coils: two 2*2 coil packs (Bosch 0 221 503 407)
Cylinders firing together are:
1 5 4 8
6 3 7 2
The coil packs are connected as follows:
EC36-pin35 to Coil 1
EC36-pin33 to Coil 2
EC36-pin34 to Coil 3
EC36-pin36 to Coil 4
Therefore cylinders are wired as follows:
Cylinders 1 & 6 to Coil 1 to EC36-pin35
Cylinders 5 & 3 to Coil 2 to EC36-pin33
Cylinders 4 & 7 to Coil 3 to EC36-pin34
Cylinders 8 & 2 to Coil 4 to EC36-pin36
Now HOW DO I FILL THE h[2], IGNITION OUTPUTS TABLE IN THE MEGATUNE? IS THIS CORRECT?
0 Drive_07
1 Drive_05
2 Drive_03
3 Drive_01
This spark table can be used, right?
