MembersPage/JimW/Sensors (2010-01-25 19:27:16)

Intake Air Temperature Sensor: GM standard

Coolant Temperature Sensor: GM standard

EGT Sensor:

Standard 2mm sensors placed at header collector


WBO2 Setup:

wbo2_pump_pw (0x63) gives voltage of -0.03V.

Rcal measured at 127 ohms, so wbo2_calibration is set to 0xB0.

100ohm resistor testing method:

nernst_dc_target=8D gives Nernst at 3.96V

nernst_dc_target=BD gives 4.47V.

Old WBO2 issues can be found at MembersPage/JimW/Sensors/OldWBOxygenIssues, may be able to help someone with troubleshooting