Intake Air Temperature Sensor: GM standard
Coolant Temperature Sensor: GM standard
EGT Sensor:
Standard 2mm sensors placed at header collector
WBO2 Setup:
wbo2_pump_pw (0x63) gives voltage of -0.03V.
Rcal measured at 127 ohms, so wbo2_calibration is set to 0xB0.
100ohm resistor testing method:
nernst_dc_target=8D gives Nernst at 3.96V
nernst_dc_target=BD gives 4.47V.
Old WBO2 issues can be found at MembersPage/JimW/Sensors/OldWBO2Issues, may be able to help someone with troubleshooting