Hello All,
My Name is Jens and live in Denmark. I´m here because interest and because I´m stuck with my Vems project.
.Project Car:
Nissan 200sx Ca18det 1992 EU Model.
Norris Designs 2009 Fast road engine with H steel rods.
GT2860RS, 550cc injectors, big intercooler/oil/water, 60mm TB, Ca16de inlet cam on 118", 3" Exhausts and Cat.
.
Suspension: HSD coilover.
Brakes: Front 299x32 sky brakes.
Wheels: Rota et10 16x8 Toyo/R888 225/45.
.I am totally new in the world of engine management.
.I use most of the original wiring with an adapter connection.
Assembled v3.6 controller prepared for 300kpa, 2xEGT, knock and lcd.
Nissan 24slot+sync CAS trigger.
LSU4 Wideband.
MAT sensor.
Pneumatic valve 3way.
.I have connection between my PC and Vems Controller.
Megatune2.25
Vems Genboard V3 16x14 High-boost
.
The 2-April-10 progress.
Today I tried to find cyl.1 TDC on the pulley with strope but even if I have spark at spark plugs fly the mark.0 on the pulley around.
I read:
Engine Speed: 220
Throttle Position: OK
Spark Angle: 0deg
Pulse Width: ?
Engine Map: 1025Kpa
Manifold Air Temp: 21C
Coolant Temp: 22C
Battery Voltage: 12V- 13.5V