Fuel pressure analog signal from sensor is calculated with:
Vout=(c1*Pabs+C0)*Us
Look-up table for multiplier: \ MembersPage/Fuel?_Pressure
Vout = signal output voltage in V
Vs = supply voltage in V
Pabs = absolute pressure in kPa
C0 = -5/350
C1 = 0.8/350 kPa ^-1
With Vsupply at nominal 5V this means
Vout min = 0.500V = Devision 0
Vout max = 4.500V = Devision 255
With the req_fuel calculated at 255 kPa Fuelpressure the original PW is altered by 1/1 at Vsens_out = 2.843V