- PWM-Controlled fuelpump-output.
- Be able to choose the Secondary PWM-Output for fuelpump use.
- good idea
- Not able to use "Pump off after activity" at the moment.
- why not ? use [VT error reporting for this] - so we can reproduce the setup with your vemscfg
- Its just when using Secondary pwm-output for Fuelpump. Bad formulation from my side, sorry. It´s why i wish to implent it as a fw-function.
- why not ? use [VT error reporting for this] - so we can reproduce the setup with your vemscfg
Using a FP of this type: http://www.mrm-racing.se/index.php?pageid=fuelab_pumpe
Not high priority
New Idle Control settings suggestion.
.Life would be much easier if the refDC menu was like this:
Use this and set low PID values as standard, allowing it only to lower the refdc with 1-2% per second. I think it will give rock solid idle control and much easier to setup without oscilations.
The ECU knows exactly which refdc to target all the time.
This plus a second table for compensating refDC% against coolantTemp.
User defined refDC addition when starting coolant fan which sometimes draws lots of current.
What do you think?