MembersPage/DavidBlades/StartingWarmup (2006-03-21 03:34:44)

Cranking and CLT warmup settings

It was cold last night (around freezing) so I took the chance to sort out cold start. A lot of fiddling later and it's acceptable, but not brilliant.

Hot start is misbehaving a bit lately. Not too bad as it goes on the second attempt, but it should go on the 1st!

[add config here]

Silly mistake on my part. EGO min temperature got set to 00 when I reflashed the firmware and obviously uploaded an old config file. So the EGO correction algorithm carefully undid any warmup enrichment I had... Problem now solved.

Back to MembersPage/DavidBlades