Hello there.
I have a car here where i cannot get the ignition retarded more than 0.5 atdc with launch control! In the log I have selected max retard as 65.5 degress, but it never retards more than 0.5 degress atdc!
- Launch input wired to: EC18/ ... (mcp3208ch/ ...)
- Try to put another number in “ignition settings” “retard clamp”
Try to fill in:
- I want fuelcut above ... RPM (configured fuelcut to...)
- and fuelresume below ... RPM (configured fuelresume to...)
(Fuelcut must be higher than fuelresume). Also related to fuelcut, so need to check:
- IAC TPS threshold= ...
- will not cut fuel if TPS higher than IAC TPS threshold
- fuelcut min kPa=...
As you can see in the log file i i have selected ( for testing ) that the fuel resume must be at 3000 rpm, but resumes below 1400 rpm!
http://www.vems.hu/files/Racezone/Celica/v3.3_u008085-2013.08.16-20.37.05.vemslog
Thanks for your time.
Regards Daniel!